Lupolen 1840 D is a non-additivated, low density polyethylene. It is characterized by a high melt strength leading
to a good bubble stability during blown film extrusion. It is delivered in pellet form.
This product is not intended for use in medical and pharmaceutical applications.
Lupolen 1840D
Description
Availability
Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (190 °C/2.16 kg) | 0.25 g/10 min |
| Density | 0.919 g/cm³ |
| Tensile Modulus | 200 MPa |
| Tensile Stress at Yield | 9 MPa |
| Dart Drop Impact Strength, F50 | 280 g |
| Tensile Strength MD | 27 MPa |
| Tensile Strength TD | 25 MPa |
| Tensile Strain at Break MD | 200 % |
| Tensile Strain at Break TD | 500 % |
| Coefficient of Friction | >0.8 |
| Failure Energy | 6.5 J/mm |
| Vicat Softening Temperature (A/50) | 93 °C |
| Peak Melting Point | 108 °C |
| Haze (50 µm) | <15 % |
| Gloss (20°) | >10 |
| Gloss (60°) | >50 |
Technical Data Sheet
Technical Data SheetProcess
Blown Film
Resin
Low Density Polyethylene
Applications
Agriculture Film, Bags & Pouches, Heavy Duty Packaging, Liner Film, Shrink Film, Stretch Hood